How to Make Your Own Millinery Flower Stamens

Every once in a while I'm disappointed about my ability to secure millinery-related items.  Usually I can't find a material I once used because it's not being made anymore; if I find it, it's over priced just because it's a "millinery" item (millinery is really hot now); or it's "vintage", etc.  This time I was disappointed because I purchased several separate packages of stamens from a seller on my favorite auction site; you know the one.  I emailed the seller to ask for a discount on postage, since the stamens could all be mailed in the same envelope.  I should have known better when the seller didn't email me back.  Well! I received the stamens in one package of nasty brown paper bag torn and taped together.  I would have appreciated the stamens costing more and the postage being what it should have been.  This act led me to experiment with making my own stamens.

 After experimenting with a number of things, I found that the things shown in the image to your left gave me the best results.  These included glazed hand quilting thread, acrylic paint, and fabric stiffener.  First, I rolled my flower petals and set them aside. I cut the thread into strands approximately 24 inches long, dipped them into the fabric stiffener, and then I hung them across a clothing rack to dry (do not let strands touch). The drying only takes a few minutes.  After drying, I rapped the thread around a 2 1/2- inch piece of cardboard that I used as a cutting gauge.  Next, I cut each end of the thread.  Finally, I dipped each end into the acrylic paint.

After I dipped the stamen tips, I set them aside to dry.  I used a gridded aluminum pan, but just about anything that would  allow the stamen tips to hang over without touching each other would do.

Finally, the stamens are finished.  One group of stamens on the tray below is commercially prepared; can you tell which one?  They are the stamens on the extreme left.  To the right of these are stamens that I double dipped, first in yellow paint and then in purple paint to obtain the same effect as the first group of stamens (click on the image to enlarge it.).  I used the non-gloss paint for the second dip because it is not as thick as the glossy paint.

Tips:  For a larger stamen tip, dip stamen ends several times.  The glossy paint yields a larger stamen tip because it is thicker.  Also, setting the paint aside for approximately 15 minutes before dipping will also yield a larger tip because the paint thickens the longer it is exposed to the air.

I know this is not for everyone, but for those of us that just like to make things, this will work.  Enjoy!